SURFACE PREPARATION:
1,Surface Should Be Clean And Free Of Dust, Grease And Oil.
2,Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.
Temperature& mixed | Temperature | Clear Coat | Activator/ Hardener | Thinner |
Temperature& mixed | <15ºC | BS/ES Clear Coat | BS/ES Fast Dry Activator | BS/ES Fast Dry Thinner |
Temperature& mixed | 15-25ºC | BS/ES Clear Coat | BS/ES Standard Activator | BS/ES Standard Thinner |
Temperature& mixed | 25-35ºC | BS/ES Clear Coat | BS/ES Slow Dry Activator | BS/ES Slow Dry Thinner |
Mixing Ratio |
| 2 | 1 | 0.3-0.5 |
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray
Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Suction Spray Gun)
-Spraying Pressure: 3-4 Bar.
-Spraying Viscosity: 13~18s(Ford Cup #4 At 20ºC)
-Number Of Coats: 3 Coats Maximum.
Drying Time | Temperature | Dust Free | Tack Free | Complete Dry |
Drying Time | 20ºC | 1h | 2-3 hours | 24h |
Drying Time | 60ºC | 5 minutes | 10 minutes | 60 minutes |